Post Processor configured for Doosan milling machines with the Fanuc control configuration. This post has been written solely for this range of 5-axis machines.
Post has the correct M-Codes for coolant and chip conveyor. If you have additional M-codes you would like supported for your machine, you can request for them to be implemented by raising a support ticket.
This post fully supports Renishaw Inspection probing cycles and tool break control.
Both standard and Nano smoothing are supported in this post and can be set via the post properties to suit your configuration. These settings can be controlled via the use of Manual NC overrides for the next tool path if you require per tool path control.